Skip to content
Industrial automation products & sparesPan-India supply from Chennai

Schneider Electric · Motion Controllers

Schneider Motion Controllers Dealer & Supplier in India

Price and availability for Schneider Motion Controllers — share a part number, nameplate photo or BOM and EKA will confirm the exact model and send a quotation.

  • Part-number enquiries
  • Replacement & obsolete parts
  • Multi-line BOM quotes
  • Pan-India supply from Chennai
Schneider Motion Controllers – Creating Trajectories

Have a part number?

Enter the model or order code and we will check price and availability.

Overview

EKA is a dealer and supplier of Schneider Motion Controllers in India. We supply Schneider Motion Controllers to customers in Chennai, Bangalore, Pune, Mumbai, Ahmedabad, Hyderabad, Delhi and other locations across India — share a part number or nameplate for price and availability.

Let’s start with the basics. Motion controllers are special devices that control the engine operating modes. In other words, it’s the brain of every motion control system. As such, its task is telling the motor what to do based on the desired production outcome.

Movement Profiles and Target Positions

In fact, a motion controller contains the movement profiles and the target positions for the application, and creates the trajectories that the engine must perform to satisfy the commands. Motion control is often a closed circuit, so controllers monitor the actual path and corrects positioning or speed errors.

Feedback-Based Systems

In feedback-based systems, motion controllers take an input command sent by the user, compare it with a feedback signal from the motor and apply corrective actions so that the desired input/position and actual output/position match with little – or zero – margin of error.

Creating Trajectories

When creating trajectories for the motor (and/or actuator), the motion controller generates motion profiles. These are the sequences of position commands in relation to time that indicate to the motor where and how fast to place a load. Finally, the motion controller uses the trajectories created to generate the correct torque commands, which are then sent to the drive.

Schneider Motion Controllers

Schneider Motion Controllers - Lexium Controller

Schneider Motion Controllers - Lexium Controller

Highlights

  • Simplicity Integrated software solution with an ergonomic interface for axis configuration (Easy Motion and Motion Pro).
  • Application Function Blocks (rotary knife, cut to length, grouping/non-grouping, clamping…)
  • PLCopen function blocks
  • Remote graphic terminal for commissioning.
  • Up to 8 synchronized axes
  • CANopen, Modbus, Ethernet, Profibus DP, DeviceNet
  • Simple or complex machines, compact, modular or special
  • Integration into standard automation architectures available on the market.

Applications

  • Material handling (conveyors, palletisers, storage and retrieval systems) and transfer machines (gantry cranes, etc.)
  • Assembly machines (inserting, clamping, etc.)
  • Inspection and quality control machines (stress testing, etc.)
  • Machines working “on the fly” (cutting, printing, marking, etc.)
Schneider Motion Controllers - PacDrive 3 LMC Eco / Pro / Pro 2

Schneider Motion Controllers - PacDrive 3 LMC Eco / Pro / Pro 2

Highlights

  • With the PacDrive 3 LMC Eco and Pro/Pro2 series controllers, MachineStruxure offers a scalable hardware platform for complete automation solutions, including a logic and motion/robotics component.
  • Starting with controllers for synchronizing up to four servo axes, PacDrive provides scalable performance for synchronizing up to 130 servo axes (at a 1 ms network update rate), and up to 255 virtual axes.
  • All controllers are software-compatible, since all have identical Schneider Electric Logic Motion Runtime software. Users can program up to 4,096 dynamic electronic cam disks operating in parallel.
  • The program can switch between electronic cam disks during operation. All controllers have an integrated PLC (5 μsec for 1000-bit instructions).
  • PLC, motion/robotics and IT functionality, no additional and/or proprietary hardware required for the complete machine (incl. robotics)
  • Scalable controller performance from 0 to 130 servo drives/robot axes (in parallel up to 250 virtual axes)
  • 4096 dynamic electronic cam disks can be operated in parallel
  • 1 msec network update rate for 130 servo axes
  • Integrated high speed I/O - externally expandable
  • Fully Ethernet-based communication with Sercos for I/O, motion (robotics), and safe communication
  • Realtime controller-to-controller communication on line level via Sercos in parallel to Sercos communication on field level
  • Network with up to 20 controllers/machines possible
  • Supporting other RT Ethernet solutions, standard IEC field busses and as well TCP/IP communication
  • Supports international protocol standards for vertical integration, remote maintenance and web services
Schneider Motion Controllers - Modicon M262

Schneider Motion Controllers - Modicon M262

Highlights

  • Digitization Digitize your machine thanks to IIoT-readiness.
  • Performance Improve machine performance with up to 30% faster motion and 4 times faster logic.
  • Efficiency Save time during commissioning and maintenance.
  • Flexibility Increase flexibility across logic and motion applications with optimized or performance I/O and scalable safety integration.
  • The Modicon M262 is ultra-connected while protected by end-to-end cybersecurity and encrypted communication:
  • Machine to devices: Thanks to open protocols such as OPC UA client/server, EtherNet/IP, Modbus TCP, Sercos.
  • Machine to human: With improved diagnostics, Machine Assistant, and integrated WebVisu, saving time on commissioning and maintenance.
  • Machine to plant: With a large choice of protocols and services, the Modicon M262 can be easily connected to ERP, MES, SCADA, CMS, CMMS…
  • Direct machine to cloud: Push your data to cloud-based solutions such as EcoStruxure Machine Advisor​. Boost controller and digital machine capabilities through the many existing cloud applications using API.
  • The productivity of motion-centric machines is directly related to system reaction time, set-point frequency, and functionalities. With as fast as 1 ms real-time bus cycle time to synchronize axes, the Modicon M262 is one of the fastest and most precise motion controllers in its category for general motion control, CNC, and point-to-point robotics:
  • Real-time communication from control with excellent autotuning capabilities in our Lexium servo drives for high-quality production results
  • Camming functions for synchronized motion design
  • Different actuator modes, using synchronous position or velocity
  • 3D / G-code editor for motion design with parallel textual and graphical display and DXF import
  • CNC library and editors, with all function blocks for interpolations, path processing, and compensation
  • CNC library and editors, with all function blocks for interpolations, path processing, and compensation

Looking for a specific Schneider model?

Send the order code, a photo of the nameplate or your full list — we confirm the exact variant before quoting.

Manuals & documents on request

Next step

Get a quote for Schneider Motion Controllers

Share model numbers, quantities and delivery location. EKA confirms the exact variant and sends price and availability.